AT2E is quality control apparatus for packaging and beverage, agro-food, pharmaceutical, cosmetic, chemical and other industries. AT2E is particularly specialized in torque measurements (TORQUE TEST), leak tests (LEAK TEST – BUBBLE TEST) pressure tests, vacuum tests, leak tests, force tests (PUSH AND PULL TEST) traction compression crushing stretching, tearing (C02) pressure, vacuum, but also in the tests of resistance of the packagings: explosion, bursting, swelling, deformation (BURST TEST GLASS, BURST TEST PET) resistance to axial forces (TOP LOAD TEST).
In addition, AT2E also offers a wide range of dimensional measuring devices: Perpendicularity of bottles and preforms, thickness measurement by probe or thickness measurement using a magnetic ball (HALL) method, height measurement, concentricity, control Of the boxes, diameter control. AT2E offers you the essential instrument for the analysis of your distribution of the material at blowing: the cut bottle with heating wire (HOT WIRE BOTTLE CUTTER) Finally, because of its experience in these fields, AT2E is at your disposal to advise you in carrying out the tests.
AT2E provides remote and on-site consultation to assist you in the implementation of your tests.
In addition, AT2E also offers a wide range of dimensional measuring devices: Perpendicularity of bottles and preforms, thickness measurement by probe or thickness measurement using a magnetic ball (HALL) method, height measurement, concentricity, control Of the boxes, diameter control. AT2E offers you the essential instrument for the analysis of your distribution of the material at blowing: the cut bottle with heating wire (HOT WIRE BOTTLE CUTTER) Finally, because of its experience in these fields, AT2E is at your disposal to advise you in carrying out the tests.
AT2E provides remote and on-site consultation to assist you in the implementation of your tests.
|
TMV-7 | TOUCH SCREEN ELECTRONIC TORQUE TESTEROur torque tester are designed with a special mechanical system for measuring torque which cancels most non-coaxial and top load influences on the measurement. These features cancel most operator induced influences on the measurement for maximum repeatability.
|
|
TMV-5 | TOUCH SCREEN ELECTRONIC TORQUE TESTEROur torque tester are designed with a special mechanical system for measuring torque which cancels most non-coaxial and top load influences on the measurement. These features cancel most operator induced influences on the measurement for maximum repeatability.
|
|
SSA ECO | ANALOG BUBBLE TESTER | LEAK TESTER BY PRESSURIZATIONAT2E SSA-ECO secure seal analyzer is for testing the secure seal performance of products. With AT2E patent needle, it makes the installation and piercing very quick and easy in any medium. By vacuum technology and special design, the needle uses a function of self-holding on the tested products. However, the SSA-ECO can be compatible with using the needle of the classic Secure Seal Tester (typical screwed needle). It’s stainless steel design makes it resistant of any explosion during the test and ensures the safety of the operator.
|
|
BT ETA 5 | Touch Screen Dynamometric Torque BottleOur Torquemeters are designed with a special mechanical system for measuring torque which cancels most non- coaxial and top load influences on the measurement. These features cancel most operator influences on the measurement for maximum repeatability
|
|
TCT-2 | Traction and Compression Tester (Universal Tester)AT2E TCT-2 measure the resistance to tear or top load force (traction or compression) for all kind of packaging. Sample installed on the support and the force is raised in tear or top load direction gradually. The distance between the gauge and the support plate and column can be adjusted on request.
|
|
PL-G | Polarization Light for GlassStress introduced during the manufacture of glass components has an important effect on the strength of the product. This effect can be detrimental or beneficial in that it may contribute to failure in service, or to an increase in strength. It is clearly important for quality control to monitor the residual stresses that are present.
|
|
SCT-D | Stress Crack Tester (26 Positions)The AT2E SCT-D Stress Crack Tester is designed to test the internal stress in bottle base and for determining the stress crack resistance of blow-molded PET carbonated soft drink bottles by measuring the propensity for base cracking upon exposure to an aqueous sodium hydroxide solution under a controlled environment, so that to estimate the long term behavior of bottles.
|
|
ubpt-2 | universal bottle perpendicularity gauge
|
|
ubpt-3 | UNIVERSAL BOTTLE PERPENDICULARITY GAUGE with 3 measuring heads (for mouth clearance, perpendicularity & height) and integrated double automatic calculatorsUBPT-3 Universal Bottle Perpendicularity Gauge with 3 measuring heads (for mouth clearance, perpendicularity & height) and integrated double automatic calculators is used to measure the perpendicularity (deviation) of bottle and it’s a standard equipment for packaging and beverage industries.
|
|
CET-1 | Cork extraction testerCET-1 Cork Extraction Tester is a force test system. It has been designed for wine producer and cork manufacturing industries. Easy to use, it allows to measure cork extraction or insertion and permits to improve the cork products and assembly/sealing process.
CET-1 ensures a repeatedly and accurate measure to check the push-in or pull-off force necessary to insert or extract the cork from bottles. This is a standard test to ensure the Cork manufacturer or wine producer to let the end consumer open easily the bottle. It also allows to maintain the wine quality. |
|
permanent aphrometerThis aphrometer checks the evolution of the pressure during the secondary fermentation.
Remove one bottle without cap from the filling machine and put the aphrometer on the bottleneck. The permanent aphrometer will remain on the bottleneck during the entire secondary fermentation. |
|
simplified aphrometerThe simplified Aphrometer is designed to check the pressure and the vacuum in the bottles of still wine (Bordeaux bottles, Burgundy bottles).
Thanks to its sting this pressure gauge pierces corks and some synthetic corks, but it cannot pierce crown caps or all other metallic shutters. The cork ensures the airtightness. |
|
crown cap aphrometerThis aphrometer is designed to check the pressure during the secondary fermentation.
This Champagne pressure gauge checks instantaneously the pressure in the bottles topped on with a crown cap with or without plastic shutter. A gasket ensures the airtightness between the aphrometer and the crown cap. |
|
PPS-1 PREFORM PROFILE SAW
The PPS-1 Preform Profile Saw is suitable for cutting different kinds of preforms for quality control of material distribution, especially for multi-layer preforms. The total mechanical design and electricity free, more compatible and adaptable to various working environments.
|