​AMTG-2 | ACCURATE MAGNETIC THICKNESS GAUGE

The AMTG-2 is a portable magnetic thickness gauge. It is used to measure the thickness of non-magnetic materials such as plastic, glass, ceramic, aluminum, titanium, copper, etc. The accuracy of the measurement is not affected by the shape of the samples.
 
It is designed using the Hall Effect principle. A simple, precise measurement is obtained using the following steps:
  • Place the steel ball on one side of the sample and the probe on the opposite side.
  • Move the sample, so the probe and ball are in the desired testing position.
  • The steel ball is  drawn to the probe through magnetism, automatically.
  • The Hall Effect sensor on the probe accurately measures the distance between the probe tip and the steel ball.
  • The measurement is displayed on the touchscreen.
Advantages:
  • Non-destructive measurement.
  • High resolution 7” touchscreen.
  • Dynamic display: measurement value / graph / date / hour / battery life.
  • Full aluminum frame.
  • Fast and accurate measurement of the thickness.
  • Can obtain accurate thickness measurements in corners, small radius areas and some irregularly shaped materials.
  • Displays real-time measurement value.
  • Max. and Min. mode: Automatic capture of the maximum or minimum value.
  • Value difference function: Display the value difference between preset value and actual measured value.
  • “CYCLE” function: Record the Max, Min, Average value & generate graph during a predefined time. “Delayed start & Auto-stop” function frees the hands of operator and is convenient for large-size sample measuring.
  • Alarm function: Programmable, warns the high or low preset value by sound or visual indicator.
  • Password function enables the safety of the calibration data and measuring data.
  • Can store 999 measurement data sets.
Technical characteristics:
  • Measure mode: Normal / High accuracy
  • Range options: 0-4 mm, 0-6 mm, 0-8 mm or 0-10 mm thickness
  • Display mode: Real-time / Minimum or Maximum
  • Resolution: 0.01 mm or 0.001 mm (0.001" or 0.0001")
  • Display: TFT screen displays the real time reading, minimum reading, alarm status and data info
  • Outputs: RS-232
  • Calibration:
    • Single Point Calibration for day-to-day use
    • Multi-point calibration (up to 21 points, according to the measurement range)
  • Power : DC 8.4V
  • Units: mm / Inch
  • Language: English
  • Dimensions (control box): 210 x 150 x 65 mm / 8.3” x 5.9” x 3.3”
  • Net weight: 4.5 lbs / 2 kg (Weight with transport case: 11 lbs / 5 kg)
  • Measure range (by steel ball Ø):
    • Steel Ball Ø 5.00 mm / 0.197”: 1 to 10 mm / 0.04 to 0.39”
    • Steel Ball Ø 4.76 mm / 0.187”: 0 to 6.35 mm / 0 to 0.25”
    • Steel Ball Ø 3.18 mm / 0.125”: 0 to 4.57 mm / 0 to 0.18”
    • Steel Ball Ø 1.59 mm / 0.063”: 0 to 2.29 mm / 0 to 0.09”
    • (Custom made for other ranges)
  •  Measure accuracy (by steel ball Ø):
    • Steel Ball Ø 5.00 mm / 0.197”: 1% ±0.003
    • Steel Ball Ø 4.76 mm / 0.187”: 1% ±0.003
    • Steel Ball Ø 3.18 mm / 0.125”: 2% ±0.003
    • Steel Ball Ø 1.59 mm / 0.063”: 3% ±0.003
    • (Custom made for other ranges)​
Standard configuration:
  • Standard probe with cable and stand
  • User manual
  • Foot switch
  • Power Charger
  • Portable case
  • AMTG-2 0-4 mm and 0-6 mm ranges:
    • 3 packs of steel balls: 1.59 mm Ø, 3.18 mm Ø and 4.76 mm Ø steel balls
    • 3 ball supports for the following Øs: 1.59 mm Ø, 3.18 mm Ø and 4.76 mm Ø
  • AMTG-2 0-8 mm and 0-10 mm ranges:
    • 3 packs of steel balls: 3.18 mm Ø, 4.76 mm Ø and 5.00 mm Ø steel balls
    • 3 ball supports for the following Øs: 3.18 mm Ø, 4.76 mm Ø and 5.00 mm Ø ball supports
 
Optional Items:
  • Rechargeable lithium battery. Full loaded working time without charging is approx 2-3 hours.
  • QUALIMESURE software
  • Calibration pack 

​​​See AMTG-2 on the official AT2E-USA website

product videos