Picture
AT2E is quality control apparatus for packaging and beverage, agro-food, pharmaceutical, cosmetic, chemical and other industries. AT2E is particularly specialized in torque measurements (TORQUE TEST), leak tests (LEAK TEST – BUBBLE TEST) pressure tests, vacuum tests, leak tests, force tests (PUSH AND PULL TEST) traction compression crushing stretching, tearing (C02) pressure, vacuum, but also in the tests of resistance of the packagings: explosion, bursting, swelling, deformation (BURST TEST GLASS, BURST TEST PET) resistance to axial forces (TOP LOAD TEST).

In addition, AT2E also offers a wide range of dimensional measuring devices: Perpendicularity of bottles and preforms, thickness measurement by probe or thickness measurement using a magnetic ball (HALL) method, height measurement, concentricity, control Of the boxes, diameter control. AT2E offers you the essential instrument for the analysis of your distribution of the material at blowing: the cut bottle with heating wire (HOT WIRE BOTTLE CUTTER) Finally, because of its experience in these fields, AT2E is at your disposal to advise you in carrying out the tests.

AT2E provides remote and on-site consultation to assist you in the implementation of your tests.
FRANCE

mÉXICO
Picture

TMV-7 | TOUCH SCREEN ELECTRONIC TORQUE TESTER

Our torque tester are designed with a special mechanical system for measuring torque which cancels most non-coaxial and top load influences on the measurement. These features cancel most operator induced influences on the measurement for maximum repeatability.

TMV-5 | TOUCH SCREEN ELECTRONIC TORQUE TESTER

Our torque tester are designed with a special mechanical system for measuring torque which cancels most non-coaxial and top load influences on the measurement. These features cancel most operator induced influences on the measurement for maximum repeatability.

ADATMV5 | MONOPOST AUTOMATED TORQUE TESTER

The ADATMV automated torquetester allows to control your torque without any human influence . This TOTAL abstraction of the human factor provides a high accuracy in measuring and optimization of your datas analysis in Lab or bottling line.

SSA ECO | ANALOG BUBBLE TESTER | LEAK TESTER BY PRESSURIZATION 

AT2E SSA-ECO secure seal analyzer is for testing the secure seal performance of products. With AT2E patent needle, it makes the installation and piercing very quick and easy in any medium. By vacuum technology and special design, the needle uses a function of self-holding on the tested products. However, the SSA-ECO can be compatible with using the needle of the classic Secure Seal Tester (typical screwed needle). It’s stainless steel design makes it resistant of any explosion during the test and ensures the safety of the operator.
​

BT ETA TORQUE ECO | Dynamometric Torque Bottle

​The new AT2E BT ETA TORQUE ECO has been developed in order to allow operators and calibration team to check in a fast way the accuracy of any torquetesters.

BT ETA 5 | Touch Screen Dynamometric Torque Bottle

Our Torquemeters are designed with a special mechanical system for measuring torque which cancels most non- coaxial and top load influences on the measurement. These features cancel most operator influences on the measurement for maximum repeatability

​BT ETA TORQUE | Dynamometric Torque Bottle

Our torquetester are built in with special mechanism permitting to avoid top load influence on measurement. Also built in a high speed electronic reading of measurements.

TORQUE CHECK | Hand Held Torque Controller

The TORQUE CHECK has been developed in order to allow operators to control the torque, calibration team to check in a fast way the accuracy of any torquetesters and maintenance to control and adjust torque directly on capping heads

​VLT-ST | VACUUM LEAK TESTER (plc mODEL)

Air and water tight test box: vacuum test. The machine is equipped with a touch screen. It‘s visual and easy to operate. Adjustable vacuum and holding time stage setting, meets different test requests of various products.

VLT-ST | Vacuum Leak Tester (Standard Model)

VLT-ST is equipped with a touch screen. It‘s visual and easy to operate. Adjustable vacuum and holding time stage setting, meets different test requests of various products.

​SSA-D | Secure Seal Analyzer (Standard Model)

AT2E SSA-D secure seal analyzer is for testing the secure seal performance of products. With AT2E patent needle, it makes the installation and piercing very quick and easy in any medium

SSA-PLC | Secure Seal Analyzer (PLC Model)

AT2E SSA-PLC secure seal analyzer is for testing the secure seal performance of products. With AT2E patent needle, it makes the installation and piercing very quick and easy in any medium. 

TCT-2 | Traction and Compression Tester (Universal Tester)

AT2E TCT-2 measure the resistance to tear or top load force (traction or compression) for all kind of packaging. Sample installed on the support and the force is raised in tear or top load direction gradually. The distance between the gauge and the support plate and column can be adjusted on request.

BTLT-2 | Glass Bottle Top Load Tester

The BTLT-2 is an instrument for testing the resistance to Top load effort on glass containers. It has been widely used by the glass container manufacturers and users. 

DYNA-4000 | Dynamometer

The DYNA-4000 is an instrument for testing the resistance to top load effort on PET bottles or cans

FT-1 | Fatigue Tester

The “FT-1 Fatigue Tester” is used to test and analyze the durability and quality of all packaging in compression or traction direction. It’s widely used in cosmetic, pharmaceutical and other industries.

BT ETA FORCE SHF | Dynamometric Force Bottle

​Our dynamometers include a special mechanical design permitting to avoid all influence from non coaxial efforts. Also built in a high speed electronic reading of measurements

co2da 2017 | automatic shaker and co2 calculator

​AT2E CO2DA - Automatic Shaker & CO2 Calculator is a special instrument which is for calculating the carbon dioxide content in the filled drink in glass/PET bottles and cans.

CO2-EASY / CO2-EASY-D (DIGITAL) |  CO2 measuring device

For a constant quality and taste of all kinds of carbonated drinks, the critical parameter is the CO2 (carbon dioxide) content in the liquid.

CO2-CS | Automatic CO2 Calculating System

​CO2-CS Automatic CO2 Calculating System is an innovative and full automatic CO2 content calculating system which is newly developed by AT2E

PVG-A/PVG-D | Pressure or Vacuum Gauge

The "PVG" is used to measure pressure or vacuum of can or bottle. Simply place the sample under the entity manometer or vacuum meter and lower the lever

PVG-P | Pressure or vacuum gauge

“PVG-P” is the portable model for measuring pressure or vacuum into bottle.
​
Install the PVG-P under the finish neck and adjust the needle on the cap’s center, then screw the nut.
The needle will pierce the cap without leakage and check the pressure or vacuum value.

pvg-pocket | portable pressure or vacuum gauge

"PVG-Pocket" is our smallest and most portable model for measuring pressure or vacuum of a bottle or can.
Simply press the PVG-P firmly onto the cap and check pressure or vacuum.

PL-G | Polarization Light for Glass

Stress introduced during the manufacture of glass components has an important effect on the strength of the product. This effect can be detrimental or beneficial in that it may contribute to failure in service, or to an increase in strength. It is clearly important for quality control to monitor the residual stresses that are present.

PL-P | Polarization Light for Preform

Many of the defects found in PET container preforms can be detected by using the PL-P. Preforms viewed in polarized light exhibit a colored birefringence pattern.

SCT-D | Stress Crack Tester (26 Positions)

​The AT2E SCT-D Stress Crack Tester is designed to test the internal stress in bottle base and for determining the stress crack resistance of blow-molded PET carbonated soft drink bottles by measuring the propensity for base cracking upon exposure to an aqueous sodium hydroxide solution under a controlled environment, so that to estimate the long term behavior of bottles.

​AMTG-2 | Accurate Magnetic Thickness Gauge

​The "AMTG-2" is a portable feeler gauge. It is used to measure the thickness of non-magnetic materials, such as plastic, glass, ceramic, aluminum, titanium, copper etc... The accuracy of the measurement is not affected by the shape of the samples.

​HG-1 | Height Gauge

​HG-1 Height Gauge which is equipped with a measuring platform can be used to measure the height of bottle, can and other packaging. 

​BCG | Base Clearance Gauge

​The BCG - Base Clearance Gauge is specifically designed for measuring the dome height in the bottom of PET containers. 

​BTG-D | Glass Bottle Wall Thickness Gauge 

​BTG-D Digital Glass Bottle Wall Thickness Gauge is a manual operating gauge which is used for measuring the wall thickness of glass bottles.

PTG-A / PTG-D | Preform Thickness Gauge

PTG Preform Thickness Gauge is used to measure the preform thickness.

​UBPT-1S | Universal Bottle Perpendicularity Gauge

UBPT-1S Universal Bottle Perpendicularity Gauge with integrated automatic calculator is used to measure the perpendicularity (deviation) of bottle and it’s a standard equipment for packaging and beverage industries. 

UBPT-1 | Universal Bottle Perpendicularity Gauge

UBPT-1 Universal Bottle Perpendicularity Gauge is used to measure the perpendicularity (deviation) of bottle and it’s a standard equipment for packaging and beverage industries.

ubpt-2 | universal bottle perpendicularity gauge 
with 2 measuring heads (for mouth clearance and perpendicularity)

UBPT-2 Universal Bottle Perpendicularity Gauge with 2 measuring heads (for mouth clearance and perpendicularity) is used to measure the perpendicularity (deviation) of bottle and it’s a standard equipment for packaging and beverage industries.

ubpt-3 | UNIVERSAL BOTTLE PERPENDICULARITY GAUGE with 3 measuring heads (for mouth clearance, perpendicularity & height) and integrated double automatic calculators

UBPT-3 Universal Bottle Perpendicularity Gauge with 3 measuring heads (for mouth clearance, perpendicularity & height) and integrated double automatic calculators is used to measure the perpendicularity (deviation) of bottle and it’s a standard equipment for packaging and beverage industries.

PPG-A / PPG-D | Preform Perpendicularity Gauge

The "PPG-A" and "PPG-D" are used to measure the perpendicularity (deviation) of the preform and it’s a standard equipment for PET and beverage industries.

FHG | Fill Height Gauge

Simple and useful measuring tool for fill height measurement. It’s designed for all size bottles. 

​CCLT | Crown Cap Leak Tester 

Used for testing the air-tightness of the crown cap. Stainless steel design ensures the durability of the tester during test. 

PGNG | Go-no-Go Gauge

Quality control gauges for checking the threaded tops of glass and plastic containers

HDC | Height and Thickness Gauge of Crown Cap 

​This unit has an excellent basis for measuring. It’s easy to use. Crown cap height and thickness are measured by analog indicator. It is widely used in crown cap, brewery and beverage industries. 

ODG-1 | Outer Diameter Gauge

The aim of this unit is to test whether the outside diameter of the tested sample is within standard or not

IDG-1 | Internal Diameter Gauge

The aim of this unit is to test whether the internal diameter of the tested sample is within standard or not.

PBBT-1 | PET Bottle Burst Tester 

PBBT-1 PET Bottle Burst Tester is a specialized test equipment for testing the PET bottles. It’s designed in accordance with the three international test methods which are commonly use

​GBBT-1 | Glass Bottle Burst Tester 

The GBBT-1 is an instrument for testing the internal pressure resistance of glass containers. It has been widely used by the glass container manufacturers and users. 

GBBT-2 | Glass Bottle Burst Tester

The GBBT-2 is an instrument for testing the internal pressure resistance of glass containers. It has been widely used by the glass container manufacturers and users. 

HWBC-2 | Hot Wire Bottle Cutter 

AT2E innovative HWBC-2 Hot Wire Bottle Cutter offers an automated and cost saving way for cutting containers for section weight analysis. 

HWBC-1 | Hot Wire Bottle Cutter 

The HWBC-1 Hot Wire Bottle Cutter offers an easy and cost saving way for cutting containers for section weight analysis. 

ER-1 | Enamel Rater 

AT2E ER-1 Enamel Rater offers a fast and accurate method to measure the integrality of internal coating of containers. 

SeamCheck | Automatic Double Seam Projector

​Seaming quality is critical and important for can inspection. And it’s the one of the most concerned point for can, beverage and food manufacturing companies.

​ANSS | Antinoise Seaming Cutting Saw

The Antinoise Seaming Cutting Saw is a saw with a noise resistant design and a double blade for double seaming inspections.

SS-1 | Seaming Cutting Saw

​SS-1 Seaming Cutting Saw is a specially designed saw for seam cutting purpose. Equipped with linear guide rail, cans’ moving during cutting will be very precise and accurate in track. 

​STG-1 | Seam Thickness Gauge

​STG-1 Seam thickness gauge is used to measure the Seam thickness of cans. Easy-operation design offers a fast and accurate measurement of seam thickness. 

CIDG-1 | Can Internal Diameter Gauge 

The CIDG-1 Can Internal Diameter Gauge is for quick checking the internal diameter of necked-in cans. For each diameter, a corresponding calibration block will be supplied along with the gauge.

CG-D | Countersink Gauge 

CG-D Countersink Gauge is a digital gauge for measuring countersink depth of can and end. For fast and easy measurement, the zeroization base is equipped. 

FWG-1 | Flange Width Gauge

FWG-1 Flange Width Gauge is used to measure the flange width of empty cans. Easy-operation design offers a fast and accurate measurement of flange width. 

CSM | Can Seam Micrometer 

​CSM Can Seam Micrometers is used for a quick measurement of seam thickness and seam length. It’s an easy-operated tool and widely use in canning industry. 

CO | Can Opener

​A simple and convenient tool used to remove the center section of the can end while keeping the double seam intact. 

preform cutter

AT2E Preform Cutters allow to cut easily the PET bottles necks and PET preforms,  in order to prepare the bubble test with adapted cap holder or to measure some accurate points on a preform.

CET-1 | Cork extraction tester

CET-1 Cork Extraction Tester is a force test system. It has been designed for wine producer and cork manufacturing industries. Easy to use, it allows to measure cork extraction or insertion and permits to improve the cork products and assembly/sealing process.
CET-1 ensures a repeatedly and accurate measure to check the push-in or pull-off force necessary to insert or extract the cork from bottles.
This is a standard test to ensure the Cork manufacturer or wine producer to let the end consumer open easily the bottle. It also allows to maintain the wine quality.

permanent aphrometer

This aphrometer checks the evolution of the pressure during the secondary fermentation.
Remove one bottle without cap from the filling machine and put the aphrometer on the bottleneck.
The permanent aphrometer will remain on the bottleneck during the entire secondary fermentation.

simplified aphrometer

The simplified Aphrometer is designed to check the pressure and the vacuum in the bottles of still wine (Bordeaux bottles, Burgundy bottles).
Thanks to its sting this pressure gauge pierces corks and some synthetic corks, but it cannot pierce crown caps or all other metallic shutters.
The cork ensures the airtightness.

crown cap aphrometer

This aphrometer is designed to check the pressure during the secondary fermentation.
This Champagne pressure gauge checks instantaneously the pressure in the bottles topped on with a crown cap with or without plastic shutter.
A gasket ensures the airtightness between the aphrometer and the crown cap.

cork aphrometer

It measures the pressure in the champagne bottles topped on with a wire-hood and a cork.
Its strong mechanism allows it to pierce easily the wire-hood and the cork to check.
The cork ensures the airtightness during the test.